Parallel Interface; Serial Interface - Epson EPL-N2700 Service Manual

EPSON EPL-N2700 / N2750

1.3.2 Parallel Interface

Interface type: IEEE1284 bidirectional high-speed parallel
o
interface
Operation modes: Compatibility, Nibble, ECP
o
Connector: 57RE-40360-830B(D7A) DDK or equivalent
o
Applicable plug: Amphenole equivalent
o
Device ID:
o
*1;
MFG: EPSON;
CMD: PJL, EJL, ESCPL2-00, ESCP9-84, PRPXL24-01, HP ENHANCED
PCL5, HPGL2-01, ESCPAGE-04, ESCPAGE-04
MDL: *3
CLS: PRINTER;
DES: EPSON EPL-N2700 (or EPL-N2750);
*1. Total length of Device ID + 2 (hex) are entered in hexadecimal.
*2. The following character string appears when an optional ROM DIMM is
installed:
- PostScript 3 DIMM:,POSTSCRIPT
*3. Displays model name: EPL-N2700 or EPL-N2750 according to your machine.
NOTES:
Page returns have been inserted in the explanation above to
n
make it easier to read, but it is actually given in a serial string
format without any breaks.
The CMD parameters are shown in random order. The items
n
MODE and STATUS are not included.
DES has the values for the MFG and MDL which are connected
n
with a space in between.
Product Description
o
o
o
o
o
o
o
o
∗∗
*2;
o
o
External Interface Specifications

1.3.3 Serial Interface

Type: RS-232C
Synchronization: Asynchronous
Transmission rates: 300 to 115200 bps
Parity bit: Even, Odd or NONE
Start bit: 1
Stop bit: 1 / 2
Data length: 7 or 8 bits
Hardware protocols: DTR/DSR
Software protocol: XON/XOFF (Robust mode is supported)
Connector: 17LE-13250-27(D57) DDK or equivalent
Revision B
31