Epson EPL-N2700 Service Manual page 54

EPSON EPL-N2700 / N2750
Adjust
o
LC1
n
Shows the adjusting value for the LC1's main scanning
direction. Set by EJL.
LC2
n
Shows the adjusting value for the LC2's main scanning
direction. Set by EJL.
LC3
n
Shows the adjusting value for the LC3's main scanning
direction. Set by EJL.
MP
n
Shows the adjusting value for the MP tray's main scanning
direction. Set by EJL.
Duplex
n
Shows the adjusting value for the Duplex Unit's main scanning
direction. Set by EJL. (Stage code, Modification management
mode)
MCU:
o
Shows the mechanical controller version for the printer main body.
Read on the engine side.
LCC:
o
Shows the mechanical controller version for the Large Capacity
Lower Cassette. Read on the engine side.
Multibin:
o
Shows the mechanical controller version for the Multibin unit. Read
on the engine side.
Product Description
Error Log:
o
Shows the record of the most recent 20 errors that occurred. It
includes corresponding LCD message, EJL status command, and
total sheet number. They are shown in the order of recentness. The
error types included are as follows:
Service-call error (Ones occurred after On Line indication.)
n
Paper Jam
n
LCC Error
n
Multibin Error
n
If an error has occurred for the total sheet number with which
another error has been already recorded, the new error is not
stored.
Panel Operation
Revision B
54