Power Connector - HP Pavilion g4 Maintenance And Service Manual

Power connector

Description
Power connector (includes cable)
Before removing the power connector, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the optical drive (see
7. Remove the hard drive (see
8. Remove the keyboard (see
9. Remove the top cover (see
Remove the power connector:
1. Disconnect the power connector cable (1) from the system board.
2. Remove the power connector from the base enclosure (2).
Reverse this procedure to install the power connector.
Battery on page 34).
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page 46).
Top cover on page 49).
35).
36).
39).
Component replacement procedures
Spare part number
680548-001
67