HP Pavilion g4 Maintenance And Service Manual page 69

8. If it is necessary to replace the display panel:
a. Remove the four bottom Phillips M2.5 × 3.5 screws and the two top Phillips M2.5 × 2.5
screws that secure the display panel to the display enclosure.
b. Lift the top edge of the display enclosure, (1) and then swing it up and forward until it is
perpendicular to the display panel.
c. Release the adhesive strip (2) that secures the display panel cable to the display panel,
and then disconnect the display panel cable (3) from the display panel.
d. Remove the display panel.
Component replacement procedures 61