6.
Remove the optical drive (see
7.
Remove the hard drive (see
Remove the keyboard:
1.
Remove the Phillips M2.5×6.5 screw that secures the keyboard to the computer.
2.
Turn the computer right-side up with the front toward you and open the display.
3.
Stand the computer on its left side.
4.
Insert a finger or thin tool into the optical drive bay, and then press on the back of the keyboard
until the keyboard disengages from the computer.
NOTE:
The keyboard icon in the optical drive bay
5.
Turn the computer right-side up with the front toward you.
Optical drive on page
Hard drive on page
39).
36).
indicates the point to apply pressure.
Component replacement procedures
47