Touchpad Led Board - HP Pavilion g4 Maintenance And Service Manual

TouchPad LED board

Description
TouchPad LED board (includes cable)
Before removing the TouchPad LED board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the optical drive (see
7. Remove the hard drive (see
8. Remove the keyboard (see
9. Remove the top cover (see
10. Remove the TouchPad button board (see
Remove the TouchPad LED board and cable:
1. Turn the top cover upside down, with the front toward you.
2. Apply slight pressure to the retaining clips (1) of the top cover.
3. Lift the TouchPad LED board on the right front corner (2) up and away from the top cover.
4. Remove the TouchPad LED board and cable.
Reverse this procedure to install the TouchPad LED board and cable.
56 Chapter 4 Removal and replacement procedures
Battery on page 34).
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page 46).
Top cover on page 49).
TouchPad button board on page
35).
36).
39).
Spare part number
683848-001
54).