Sending Files To An Ftp Server - Ricoh Scanner Scanner Manual

Note
❒ If authentication is required to access the folder, the login screen appears.
Enter the user name and password.
❒ If you change the protocol after entering the path name, user name, or
password, a confirmation message appears.
❒ Up to 100 computers or shared folders can be displayed.
❒ The machine may fail to transfer the file if you do not have the write priv-
ileges for the shared folder or there is not enough free hard disk space.
❒ You can register the path to the destination in the machine's address book.
For details, see "Registering the Path to the Selected Destination in the Ad-
dress Book".
Reference
p.61 "Registering the Path to the Selected Destination in the Address
Book"

Sending Files to an FTP Server

This section explains how to specify destinations when sending files to an FTP
server.
Entering the path to an FTP server manually
You can enter the path to an FTP server manually.
A
Press [Manual Entry].
B
Press [FTP].
C
Press [Manual Entry] on the right side of the server name field.
The soft keyboard appears.
D
Enter a server name.
Instead of specifying the destination using its path, you can also use its IPv4
address.
E
Press [Manual Entry] on the right side of the path field.
Specifying Scan to Folder Destinations
2
55