Scanning Part Of An Original - Ricoh Scanner Scanner Manual

Various Scan Settings

Scanning Part of an Original

This section explains how to set a custom size for scanning an area within an
original.
To scan a section of an original, measure Original Size (X1 and Y1), Start Position
(X2 and Y2), and Scan Area (X3 and Y3) on the surface of the original, and then
enter those values in the same order. Measuring methods differ depending on
the original's orientation and the position it is set in. The following example
show how to measure the size in order to scan the section marked "R". Refer to
the following examples to measure each size correctly.
6
The procedure below explains for scanning the "R" area of the original.
A
Press [Scan Settings].
B
Press [Scan Size].
C
Press [Custom Size].
114
ATF008S