Caring For Your Dtf-510U; Cleaning; Replacing The Pen Tip - Wacom DTF-510 Safety Instructions

Caring for DTF-510U

Cleaning

To clean the DTF-510U casing , use a soft cloth with mild detergent (such as dish washing liquid) diluted
DTF-510
with water. Do not use paint thinner, benzine, alcohol, or other organic solvents to clean DTF-510U casing or
pen.
To clean the display screen, use a soft, dry cloth. If necessary, slightly moisten the cloth with water and try
again. When cleaning, apply only a light amount of pressure to the display screen and do not make the surface
wet. Do not use detergent to clean the display screen; this may damage the coating on the screen. Please note
that damage of this kind is not covered by the manufacturer's warranty.

Replacing the Pen Tip

The pen tip will wear with normal use. When the nib gets too short, you can replace it with one of the extra
nibs that came with your pen. If the pen tip wears and becomes angular, it may damage the coating on the
cover glass of DTF-510U Interactive Pen Display. To avoid this, periodic nib replacement is recommended.
DTF-510
To remove the old nib:
Clasp it with the o-ring tool that came
with your pen and pull the old nib
straight out of the pen.
CAUTION
Prevent your children from swallowing the pen nib. The pen nib may accidentally be
pulled out if children are biting on them.
20
DTE-510UEN.ind 20
To insert a new nib:
Slide it straight into the barrel of the pen.
Firmly push the nib until it stops. The new nib
will slide into the correct position.
03.4.9, 6:34 PM
DTF-510