Example 8: Saving A Global Ties Preset - Extron electronics MPX Plus 866 A User Manual

Example 8: Saving a global ties preset

In the following example, the current configuration is saved as a global ties preset.
The steps show the front panel indications that result from your actions.
1. Clear all selections: Press and release the Esc button.
Press and release the Esc button.
C O N T R O L
VIEW
ENTER PRESET
The button flashes once.
2. Select Save Preset mode: Press and hold the Preset button for approximately
2 seconds until it blinks.
Press and hold the Preset button until it blinks.
PRESET PRESET
2 seconds
Release the button.
3. Select the preset number: Press and release the input or output button for the
desired preset.
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not saved.
1 2 3 4 5 6 7 8
4. Confirm the preset save: Press and release the Enter button. The current
configuration is now stored in the selected memory location.
Press the Enter button to
save the preset.
C O N T R O L
VIEW
ENTER PRESET
The Enter and Preset buttons return
to unlit or background illumination.
MPX Plus 866 A Media Presentation Matrix Switcher • Operation
ESC
All input and output buttons with
assigned presets light red.
If you then save the configuration
to a lit preset number, the
configuration data at that preset
location will be overwritten.
COMPUTER INPUTS
All input buttons return to unlit
ESC
or background illumination.
Preset Assigned
COMPUTER INPUTS
1 2 3 4 5 6 7 8
1 2 3 4 5 6
COMPUTER/AUDIO OUTPUTS
No Preset Assigned
C O N T R O L
VIEW
ENTER PRESET
• The Enter button blinks to
indicate the need to save
the preset.
• The Preset button
continues to blink.
ESC
3-29