Example 1: Creating A Set Of Computer Video And Audio Ties - Extron electronics MPX Plus 866 A User Manual

Operation, cont'd

Example 1: Creating a set of computer video and audio ties

In the following example, input 5 is tied to outputs 3, 4, and 6. The steps show the
front panel indications that result from your action.
N This example assumes that there are no ties in the current configuration.
1.
2.
3.
4.
N The entire set of potential ties can be canceled at this point by pressing and
3-12 MPX Plus 866 A Media Presentation Matrix Switcher • Operation
Clear all selections: Press and release the Esc button.
Press and release the Esc button.
C O N T R O L
VIEW ESC
ENTER PRESET
The button flashes once.
Select video and audio for the tie: If necessary, press and release the Video
button and the Audio button until the buttons light.
Press the Video button to toggle on and off.
The button lights green when selected.
Select an input: Press and release the input 5 button.
Press and release the Input 5 button.
The button lights amber to indicate that the video and audio
signals on this input will be tied to the output(s) you select next.
COMPUTER INPUTS
1 2 3 4 5 6 7 8
Select the outputs: Press and release the output 3, output 4, and output 6
buttons.
Press and release the Output 3, Output 4, and Output 6 buttons.
The buttons blink amber to indicate that the video and audio
signals on the selected input will be tied to these outputs.
1 2 3 4 5 6
COMPUTER/AUDIO OUTPUTS
releasing the Esc button. The Esc button flashes green once.
I / O
VIDEO AUDIO
Press the Audio button to toggle on and off.
The button lights red when selected.
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter button blinks
green to indicate the need to
confirm the change.