Example.7:.Saving.a.preset - Extron electronics CrossPoint 450 Plus Series User Manual

Operation, cont'd
Example 7: Saving a preset
In the following example, the current configuration is saved as a preset. The steps
show the front panel indications that result from your actions.
1.
2.
3.
4.
3-30 CrossPoint 450 Plus and MAV Plus Switchers • Operation
Clear all selections: Press and release the Esc button.
Press the Esc button to clear all selections.
C O N T R O L
VIEW ESC
ENTER PRESET
The button flashes once.
Select Save Preset mode: Press and hold the Preset button for approximately
2 seconds until it blinks.
2 seconds
PRESET PRESET
Press and hold the Preset button
until it blinks.
Select the preset: Press and release the input button for the desired preset.
Press and release the Input 1 button.
The button blinks to indicate that this
preset number is selected but not saved.
1 2 3 4 5
17 18 19 20 21 22 23 24
Confirm the change: Press and release the Enter button. The current
configuration is now stored in the selected memory location.
Press the Enter button to
save the preset.
C O N T R O L
VIEW ESC
ENTER PRESET
All input buttons and output
buttons return to unlit or
The Enter and Preset
background illumination.
buttons return to unlit or
background illumination.
All input buttons with assigned
presets light.
If you then save the configuration
to a lit preset number, the
configuration data at that preset
location will be overwritten.
(No Preset Assigned)
6 7 8 9
25
I
N
Lit
(Preset Assigned)
1 2 3
17 18 19
I
N
Unlit
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter button blinks to
indicate the need to save the
preset.
The Preset button continues
to blink.