Extron electronics MPX Plus 866 A User Manual page 102

Media presentation matrix switcher
Hide thumbs Also See for MPX Plus 866 A:
Table of Contents

Advertisement

SIS
Programming and Control, cont'd
Command/response table for basic SIS commands (continued)
Command
Information requests
Information request
Request part number
N There are up to three separate sets of Extron firmware that the switcher can report on: the MPX controller firmware,
which is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the
latest optional Extron firmware update, which is available at www.Extron.com.
Query controller firmware
version
Example:
Query software version
(verbose)
Response description: Ethernet protocol firmware version - controller firmware version - updated firmware version
Example:
Description
1.23-0.14(0.20-MPX866D Series -Wed, 16 Jan 2003 00:00:00 GMT)-0.25*(0.24-MPX866D Series -Mon, 08 Sep 2008 14:48:30 GMT)
Response:
Ethernet protocol
MPX firmware version
firmware
Request system status
Response description:
Example:
X1^
N
= Firmware version number to second decimal place (x.xx)
X1&
= Verbose firmware version-description-upload date/time
X1*
= Voltage
X1(
= Temperature
4-18
MPX Plus 866 A Media Presentation Matrix Switcher • SIS Programming and Control
ASCII command
(host to switcher)
I
N
Q
Q
0Q
0Q
* indicates the version running
S
S
Positive or negative voltage and magnitude
Degrees Fahrenheit
Response
Additional
description
(switcher to host)
]
This matrix switcher has 14
V14X12•A14X12
video and 14 audio inputs
by 12 video and 12 audio
outputs.
60-796-01
The MPX part number is
68-796-01.
X1^]
]
The factory-installed MPX
1.23
controller firmware version
is 1.23 (sample value only).
X1^
X1&
X1&]
Provide a detailed status
-
-
of the Ethernet protocol
firmware, the MPX controller
firmware, and any firmware
upgrade. The firmware that
is running is marked by
an asterisk (*). A caret (^)
indicates that the firmware
has a bad checksum or an
invalid load. ?.?? indicates
that the firmware is not
loaded.
Updated firmware version
X1*
X1*
X1*
X1*
X1*
X1(]
+3.3V•+5V•-5V•+2.5V•-15V•+15V•Temp
3.29•5.04•-5.14•15.27•-15.15•120.20
3.3V power system at 3.29V
]
Upload date and time
]
-15V power system at -15.15V
Temperature 120.20 degrees

Advertisement

Table of Contents
loading

Table of Contents