Performing Soft System Resets (Resets 3, 4, And 5) - Extron electronics MPX Plus 866 A User Manual

Operation, cont'd

Performing soft system resets (resets 3, 4, and 5)

Perform a soft reset of the switcher as follows:
1.
IP Settings
2.
3-48 MPX Plus 866 A Media Presentation Matrix Switcher • Operation
Use an Extron Tweeker or other small screwdriver to press and hold the rear
panel Reset button until the rear panel Reset LED and the front panel Video
and Audio buttons blink once (events reset), twice (system reset), or three
times (absolute reset).
LAN
RESET
Events
3 seconds
Reset
CT LINK
Press and hold
the Reset button.
LAN
RESET
6 seconds
Reset
CT LINK
Press and hold
the Reset button.
LAN
RESET
Absolute
9 seconds
Reset
CT LINK
Press and hold
the Reset button.
Release the Reset button and then immediately press and release the Reset
button again. Nothing happens if the second momentary press does not occur
within 1 second.
Release, then
immediately
press and hold.
Reset LED Reset LED
1 3
flashes once. flashes three
times.
Release, then
immediately
press and hold.
Reset LED Reset LED
2 3
flashes twice. flashes three
times.
Release, then
immediately
press and hold.
Reset LED Reset LED
3 3
flashes three flashes three
times. times.
Release the
Reset button.
Release the
Reset button.
Release the
Reset button.