d.
To move away from the highlighted block or set of sequential blocks,
press and hold the Shift
key to move the highlighting box away from the last-highlighted
element.
N If you do not perform step 3c, the last selected element will not remain
highlighted.
e.
Release the Shift
4.
To highlight another element or group of elements, repeat steps 1 through 3.
5.
To cut or copy, press the Ctrl-X
6.
To save a preset, press Alt
Enter
(figure 5-21) .
Enter
The Save a Preset dialog box appears.
a.
As desired, Tab
number.
b.
As desired, Tab
N Unless you enter a specific number and/or name, the DSP Configurator
program enters the next sequential unused preset number and the name "Preset
{number}.
c.
Tab
Tab
Alt
T
Figure 5-21 — Saving a preset using keyboard navigation
MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software
key, then use the arrow (
Shift
key.
Shift
or Ctrl-C
X
Ctrl
> T
> right arrow
T
Alt
to the Preset Number field and type a specific preset
Tab
to the Preset Name field and type a preset name.
Tab
to highlight the OK button and press the Enter
,
,
, or
key combination.
C
Ctrl
> down arrow
key.
Enter
Enter
)
>
5-35