4.4.2
Interface Menu
In the Interface menu the setting items are as follows:
Interface
1
Network
2
IEEE1284
3
RS-232C
4
USB
5
Bluetooth
6
Ignore CR/LF
7
Ignore CAN/DLE
8
External I/O
9
RFID
CAUTION:
Do not change the setting in the Interface menu if there are print jobs remaining in the printer's memory.
Complete the print job or cancel the print job before you change the setting.
Network
Interface > Network
To use LAN and wireless LAN for the interface between the host and the
printer.
The setting items are as follows:
1
Settings
2
Services
Set the LAN connection and wireless LAN con-
nection.
Set the IEEE1284 connection.
Set the RS-232C connection.
Set the USB connection.
Set the Bluetooth connection
Set to ignore CR/LF codes.
Set to ignore CAN/DLE codes.
Set the external signal (EXT).
Set the RFID.
*Shows only for RFID models.
Set IPv4, IPv6 or wireless LAN.
Set the port for connection, NTP, LPD, FTP or
SNMP.
4 Operation and Configuration
CL4NX Operator Manual
85