Adjusting The Print Position - SATO CL4NX Operator's Manual

5 Cleaning and Performing Printer Adjustments
Linerless Cutter Mode/ Linerless Mode
5.3.2

Adjusting the Print Position

Set the Pitch in the Printing > Advanced > Adjustments menu to adjust the print position.
Media feed direction
Adjustment for
"+" value
adjustment
Adjustment for
"-" value
Note
The above base reference point (print position) will be the stop position when the sensor type is set to Gap
sensor.
182
CL4NX Operator Manual
I-mark Linerless Label
Cut
position
Print
position
Cut prohibit
zone (5 mm /
0.2")
Print position
(Print head)
No
Gap sensor
-3.75 mm (-0.15") ~ +3.75 mm (+0.15")
Setting range:
203 dpi: -30 to +30 dot
305 dpi: -45 to +45 dot
609 dpi: -90 to +90 dot