SATO CL4NX Operator's Manual page 76

4 Operation and Configuration
Imaging
Printing > Imaging
Set the print reference position in the vertical and horizontal directions.
The setting items are as follows:
1 Vertical
2 Horizontal
Base reference
point after offset
Vertical
Printing > Imaging > Vertical
Set the print position in the vertical direction.
Set the offset value from the print reference position using '+' to move the
print position opposite the feed direction and '-' to move the print position in
the feed direction.
The setting range is -792 to +792 dots.
74
CL4NX Operator Manual
Offset the print position in the vertical (feed)
direction.
Offset the print position in the horizontal direc-
tion.
Liner
Pitch
Offset of vertical
+V
base reference point
+H
Print reference position
Offset of horizontal
base reference point
Label