3
Turn the head lock lever clockwise to
unlock the print head.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
4
Clean the dirt on the print head ,
platen roller and ribbon roller
using a cleaning pen or a cotton swab
dabbed with cleaning liquid.
5
Tilt the sensor guide lock down and
pull out the media sensor guide .
5 Cleaning and Performing Printer Adjustments
6
5
CL4NX Operator Manual
1
4
2
3
177