Change Cutter - SATO CL4NX Operator's Manual

Printhead Interval
System > Notifications > Change Printhead > Printhead Interval
Set the notification interval about when the print head needs to be
replaced.
Available to change only if you have selected Enabled in the Change
Printhead menu.
The printer shows the print distance as the setting value.
The setting range is 10 to 100 km.

Change Cutter

System > Notifications > Change Cutter
Notify when the cutter unit needs to be replaced.
The setting items are as follows:
1 Change Cutter
2 Cutter Life
3 Cutter Count
Change Cutter
System > Notifications > Change Cutter > Change Cutter
Enable or disable the notification function about when the cutter unit needs
to be replaced.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.
Cutter Life
System > Notifications > Change Cutter > Cutter Life
Set the notification interval about when the cutter unit needs to be
replaced.
Available to change only if you have selected Enabled in the Change Cut-
ter menu.
The printer shows the cutter count as the setting value.
The setting range is 10 to 1000 Kcuts.
Enable or disable the notification function about
when the cutter unit needs to be replaced.
Set the notification interval about when the cut-
ter unit needs to be replaced.
Shows the current number of cuts by the cutter.
4 Operation and Configuration
CL4NX Operator Manual
151