SATO CL4NX Operator's Manual page 168

4 Operation and Configuration
Certificates
Tools > Certificates
Set the wireless LAN authentication.
Available only when you have installed the USB memory.
The setting items are as follows:
1 HTTPS
2 Wi-Fi Root CA
3 Wi-Fi Client
4 Wi-Fi Private Key
5 EAP-FAST PAC
File
The procedures to install the certificates and PAC files are as follows:
1. Save the certificate files to the USB thumb drive memory.
Accepted file extensions are:
.pem, .crt, .cer, .der for Root CA and client certificate in PEM or DER
format.
.pfx and .p12 for client certificates in PKCS #12 format.
.prv and .key for private keys in PEM / PKCS#8 format.
.pac for PAC files.
2. Insert the USB thumb drive memory into the USB connector (Type A).
3. Go to the Settings > Tools > Certificates menu.
4. Select the certificate you want to install. Refer to the table above.
5. Select the certificate file from the list.
Startup Guide
Tools > Startup Guide
Enable or disable the startup guide.
The options are as follows:
• Enabled: Enable the startup guide.
• Disabled: Disable the startup guide.
If you have selected Enabled in the Startup Guide menu, the startup
guide shows the next time you power on the printer.
166
CL4NX Operator Manual
Installs the HTTPS certificates from the USB
memory.
*Available only if you have set the authentica-
tion server.
Installs the Wi-Fi Root CA certificates from the
USB memory.
Installs the Wi-Fi client certificates from the
USB memory.
Installs the Wi-Fi private key from the USB
memory.
Installs the EAP-FAST PAC file from the USB
memory.