Adjusting The Media Stop/Cut Position - SATO CL4NX Operator's Manual

Sato cl4nx printer is a high-performance labeling system
Hide thumbs Also See for CL4NX:
Table of Contents

Advertisement

3
Select Printing using the
then press the
4
Select Advanced
Offset using the
button.
The Offset screen shows.
5
Change the setting value. Press the
/
arrow buttons to select the number
and the
button to enter the number to
the text box.
The setting range is as follows:
203 dpi:
-30 to +30 dot
305 dpi:
-45 to +45 dot
609 dpi:
-90 to +90 dot
6
Press the right soft button to save the setting value.
5.3.4

Adjusting the Media Stop/Cut Position

Stop position of the label in dispenser
mode.
The regular position is to let the label stay about 1
mm (0.04") on the liner.
/
buttons,
button.
>
>
Adjustments
/
buttons and the
/
5 Cleaning and Performing Printer Adjustments
/
Stop
position
CL4NX Operator Manual
185

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents