Konica Minolta bizhub 362 User Manual page 229

6
4
Select a registered relay station, and then click [Apply].
5
If necessary, change the Port setting.
6
Click [Apply].
Reminder
If the port number is changed, be sure to turn the machine off, then on
again after the settings have been specified.
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.
6-26
Specifying settings using PageScope Web Connection
362/350/282/250/222/200