Specifying management settings
Specifying settings for the image in the results report (Mode 023)
Specify whether or not an image of the transmitted document is added to the
results report
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7, 6, 5, 4
3
2, 1, 0
Specifying settings for checked receiver transmissions (mode 200)
Specify whether or not the fax transmission is sent after checking the CSI
(called subscriber ID) signal from the recipient's machine.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit
7, 6, 5
362/350/282/250/222/200
7 6 5 4 3 2 1 0
1 1 1 1 1 0 0 0 (HEX: F8)
Description
Setting
-----------------------
1111
Specifies whether or
0
not an image of the
1
transmitted docu-
ment is added to the
results report.
-----------------------
000
7 6 5 4 3 2 1 0
0 0 0 0 0 1 0 0 (HEX: 04)
Description
Setting
-----------------------
000
Description
*Do not change these bits
when specifying setting
for this function.
Is not added
Is added
*Do not change these bits
when specifying setting
for this function.
Description
*Do not change these bits
when specifying settings
for this function.
7
Page Refer-
ence
----------
p. 2-22, p. 3-21,
p. 5-22
----------
Page Refer-
ence
----------
7-17