Imagereceiver Operations; Imagereceiver Icon; Imagereceiver Commands - Konica Minolta bizhub 362 User Manual

4
4.4

ImageReceiver operations

ImageReceiver icon

After IP Scanner is installed, the ImageReceiver icon appears in the Windows
taskbar when the computer is started. If this icon is not displayed, the
scanned image cannot be received by the computer.
The icon changes as shown below, depending on the ImageReceiver set-
tings.
Icon

ImageReceiver commands

Right-click the icon in the taskbar to display a menu.
No. Command
1 Save received images
2 Automatic Print Settings
4-28
Description
An image is open in IP Scanner. (green)
An image is open in ImageReceiver. (blue)
An image is open in ImageReceiver (when the utility was installed as a
service). (blue)
1
2
3, 4, 5
6, 7
8, 9
10
Description
If there is a check mark beside this command, image data
is opened in ImageReceiver at the same time that it is re-
ceived, even if IP Scanner is not started.
When "Save received images" is clicked, a message ap-
pears, confirming whether or not the setting specified in IP
Scanner or ImageReceiver is to be taken over. To take over
the setting, click [Yes].
Click this command to display the Automatic Print Settings
dialog box. For details, refer to"Automatic Print Settings di-
alog box" on page 4-31.
IP Scanner
362/350/282/250/222/200