Camera - EverFocus EHN Series User Manual

7.4.2 Camera

You can configure the basic camera settings on this page.
【Profile Settings】 The Profile Setting is designed with four camera modes (Vivid/High Contrast,
Standard, More Detail and User Define), which can be applied in various scenes to enhanced image
quality. You can apply different camera modes to the daytime and night time.
Day Mode: Select a camera mode and then click the Apply button to save the settings.
Vivid: Select Vivid mode to have images with optimized contrast ratio. You can further

configure the camera settings on the Advanced setup page if required. Note that selecting
the Vivid mode will lock (grayed-out) some Camera Settings on the Advanced setup page
such as Exposure Settings (AE), Noise Reduction Settings and Monitor Settings.
Standard: Select Standard mode to have images with system configured settings. You can

further configure the camera settings on the Advanced setup page if required. Note that
selecting the Vivid mode will lock (grayed-out) some Camera Settings on the Advanced setup
page such as Exposure Settings (AE), Noise Reduction Settings and Monitor Settings.
More Detail: Select More Detail mode to enhance the dark parts of the images. You can

further configure the camera settings on the Advanced setup page if required. Note that
selecting the Vivid mode will lock (grayed-out) some Camera Settings on the Advanced setup
page such as Exposure Settings (AE), Noise Reduction Settings and Monitor Settings.
User Define: Select User Define mode to customize the camera settings. You can configure

all the camera settings on the Advanced setup page.
Flicker Compensation: Check the box to enable the Flicker Compensation function. Please enable
this function only if flicker artifacts are observed.
44
EHN Series