EverFocus EHN Series User Manual page 56

White Balance Settings: Select the mode that delivers the best quality image for the camera's light
environment.
Auto: Select to let the camera automatically adjust the White Balance. In the Auto mode the

camera computes the white balance value output using color information from the entire
screen. It outputs the proper value using the color temperature radiating from a black subject
based on a range of value from 3000 to 7500K.
Manual: Select to adjust the Red and Blue values yourself in the fields below this field.

One Push: Select to enable the Push button

allow you to force the camera to readjust the white balance every time you push the Push
button. The lens will hold the same focal position until the next trigger command is received.
This function helps to prevent incorrect focusing in dark environments.
Day/Night Settings:
Auto: Select to let the camera automatically switch to Night mode (black and white images

with IR LED on) when the light levels fall to a specified level, and back to Day mode (color)
when the light levels rise to a specified level.
Day: Select to keep the camera in Day mode (color images with IR LED off), even in nighttime.

Night: Select to keep the camera in Night mode (black and white images with IR LED on), even

in daytime.
Schedule: Select to let the camera to switch to Day mode or Night mode (IR LED on) based on

the day and night schedule settings. To configure the daytime / nighttime of each day, please
refer to 7.4.6 Schedule.
Auto mode without IR LED: Select to let the camera automatically switch to Night mode (black

and white images with IR LED off) when the light levels fall to a specified level, and back to Day
mode (color) when the light levels rise to a specified level.
Night mode without IR LED: Select to keep the camera in Night mode (black and white images

with IR LED off), even in daytime.
Schedule without IR LED: Select to let the camera to switch to Day mode or Night mode (IR

LED off) based on the day and night schedule settings. To configure the daytime / nighttime of
each day, please refer to 7.4.6 Schedule.
Sharpness Settings: Select the sharpness level of the image. A low sharpness level will deliver a
softer, less detailed image. A high level will deliver a sharp, highly detailed image. Switch
Resolution Enhancement ON to enable the resolution enhancement function.
Saturation: Set the saturation value.
Monitor Settings: The user can use this field to optimize video quality of the monitor.
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
next to the Mode drop-down field. This will
50
EHN Series