Table of Contents
Advertisement
Upload to FTP: Click if you want the camera to upload the recordings to the FTP server
entered in the Set SMTP Server(email) field of the Network > SMTP/FTP page, if the Event
occurs (see 7.3.3 SMTP / FTP).
Record to SD Card: Click if you want the camera to start recording its video feed (when the
event occurs) on an on-camera SD Card (if such a card has been inserted).
Note: The recording will only be as long as the combined Pre- and Post-trigger Buffers, so
make sure you enable at least one of these buffers, especially the Post-trigger Buffer.
Record to PC: Check this box if you want the camera to start recording its video feed (when
the event occurs) on the same folder on the same PC as configured on the User Config >
Recording/Snapshot page (if such a folder has been enabled and configured).
Note: The recording will only be as long as the combined Pre- and Post-trigger Buffers (and
for as long as the event trigger is happening – e.g. a motion is detected), so make sure you
enable at least one of these buffers, especially the Post-trigger Buffer.
Network Alarm: Check this box if you want the camera to send a network alarm signal (when
the event occurs) to the CMS servers configured on the Network > Network Alarm page (see
7.3.6 Network Alarm).
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous
settings.
【Pre/Post Trigger Settings】
Pre-trigger Buffer: Select the duration for the buffer. This will determine the amount of footage
(length of time) before the event trigger moment that will be included in an event-triggered video
recording, if that buffer and video recording has been enabled in the Event Configuration Window.
Post-trigger Buffer: Select the duration for the buffer. This will determine the amount of footage
(length of time) after the event trigger moment that will be included in an event-triggered video
recording, if that buffer and video recording has been enabled in the Event Configuration Window.
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous
settings.
70
EHN Series
Advertisement
Table of Contents
