Table of Contents
Advertisement
5.
Screw the Camera Case back to the Base Plate.
Camera Case
6.
Insert the network / PoE cable or the additional cables through the Cable Gland. Up to three
cables can be inserted. Note that except the network / PoE cable, additional wires have to be
bundled into a cable with diameter ranging from 5.3mm to 6.4mm (see Step d below).
Screw Cap
Cable Gland
a.
Keep the supplied 6 Adjustment Rings for waterproofing.
• Transparent x 5 (1 mm thickness)
b.
Remove the Plug(s) from the Stopper (depends on the number of cables inserted). One
Cable Conduit can only be inserted with one cable.
Plug
Base Plate
Adjustment Ring(s)
Cable Conduit
Stopper
Stopper Claw
Screw Cap
Plug
Cable Gland
• Black x 1 (0.5 mm thickness)
9
EHN Series
Stopper
Screw Body
Advertisement
Table of Contents
