Daylight Saving; Sd Card - EverFocus EHN Series User Manual

7.8.2 Daylight Saving

Click Enable Daylight Saving to enable this schedule, and select the dates when the region's
daylight saving period begins and ends.

7.8.3 SD Card

Use this page to prepare the system for safely removing the SD Card from its slot.
【Setup SD Card】
Notification: Select the percentage of storage space that should be left on the card before the
camera notifies you of the impending storage shortage or overwrite.
Event Recording: Select if you want Event Recording only, FTP Backup only, or both.
Overwrite: Click ON if you want the card to start writing over recorded footage when its memory is
full. Click OFF if you want the card to stop recording new footage when its memory is full.
【SD Card Utility】
Capacity: This shows you how much card memory has been used and how much memory capacity
remains on the card.
Remove: Click this button before removing the card from the system.
Format: Click this button to format the card. All data saved on the SD card will be removed if the
card is formatted.
75
EHN Series