Igl Emulation Mode - SATO GL4xxe Series Operator's Manual

IGL EMULATION MODE

This chapter provides the programming sequences required to correlate the printer's interpreter language with that
of Intermec interpretor language. Use the keys of the printer's operator panel to select and enter the required
options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
ATTENTION: Perform the following programming sequence only if this is the
emulation type required. Instead, refer to the appropriate emulation chart.
ONLINE
OFFLINE
FUNCTION
EMULATION
EMULATION
Select
Select
IGL*
IGL Setup
Active
Error Reporting
Mode on Power Up
Print Language
IBM Translation
Slash Zero
EURO-Symbol
Preparsing Data
Status on <ETX>
Cutter Cmd (c)
PwrUpMod Cmd (C)
EOP Dist Cmd (D)
Intens. Cmd (d)
TOF set Cmd (F)
LRP adj. Cmd (f)
Speed Cmd (S)
Stock Cmd (T)
Vert. DPI Adjust
Reported model
Saving UDCs
Save state
GL408-412e Operator's Manual
POWER
LINE
Emulation
Mode
ENTER
Figure 4-14, IGL Emulation Mode
Unit 4: Printer Configuration
IGL Setup
Active*
Active
Yes*
Error Reporting
Display on LCD*
Mode on Power Up
Advanced 5mil*
Print Language
US ASCII*
IBM Translation
Disable*
Slash Zero
Font Based*
EURO Symbol
0x0*
Preparsing data
Disable*
Status on <ETX>
Enable*
Cutter Cmd (c)
Process*
4-17
PwrUpMod Cmd (C)
Process*
EOP Dist Cmd (D)
Process*
Intens. Cmd (d)
Process*
TOF set Cmd (F)
Process*
LRP adj. Cmd (f)
Process*
Speed Cmd (S)
Process*
Stock Cmd (T)
Process*
Vert. DPI Adjust
0*
Reported model
Auto detect*
Saving UDCs
Automatic*
IGL Setup
Save state*