Universal Serial Bus (Usb) Interface Mode - SATO GL4xxe Series Operator's Manual

UNIVERSAL SERIAL BUS (USB) INTERFACE MODE

This chapter provides the programming sequences required for USB interface setup. Use the keys of the printer's
operator panel to select and enter the required options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
ATTENTION: Perform the following programming sequence only if this is the interface
type to be used. Instead, refer to the appropriate interface programming chart.
ONLINE
OFFLINE
INTERFACES
INTERFACES
Ignore CR/LF
Item No. Check
BCC Check
History Buffer
Comm. Protocol
Host Interface
Parallel Port
USB Port
Serial Port
Printer Mgmt
Ignore CR/LF
only display if
Admin User is
enabled within
GL408-412e Operator's Manual
POWER
LINE
FUNCTION
Interface
Mode
ENTER
INTERFACES
USB Port
ENTER
USB Port
Buffer Size in K
Screens
Buffer Size in K
1 to 16KB*
Advanced
Timeout
Mode
10 sec*
Figure 4-7, USB Interface Mode
Unit 4: Printer Configuration
Ignore CR/LF
No*
Item No. Check
Disable*
BCC Check
Disable*
History Buffer
Temporary*
Comm. Protocol
Status 5*
Host Interface
Auto Switching*
4-10
INTERFACES
Host Interface
Host Interface
USB*