Dgl Emulation Mode - SATO GL4xxe Series Operator's Manual

MENU
Storage Select
B: = EMC*
Network ID
0*
Character Group
Standard Set*
Standard Sets
USA 1*
MENU
EMULATION
EMULATION
Select
Select
DGL*
GL408-412e Operator's Manual
Unit 4: Printer Configuration
ZGL EMULATION MODE (TABLE 4-11)
This menu allows the operator to map the device B: to an External Memory Cartridge or PC
Board Flash.
• B: = EMC - factory default. External Memory Cartridge.
• B: = PCB Flash - PC Board Flash.
Network Identification. Allows the operator to assign an identification number to the network.
• 0 - factory default. Without identification.
• 1 to 999 - a range of numbers to choose for idenfication.
Allows the language to be selected for the character group to represent.
There are multiple languages from which to choose. The factory default is Standard Set.
Allows further language clarification by choosing language options from a group within the
Standard Set of characters.
There are multiple languages from which to choose. The factory default is USA1.
DGL EMULATION MODE (TABLE 4-12)
Permits entry into the EMULATION Mode.
Allows the specific emulation to be selected or if the Select option is chosen, the menu to follow
will contain a list of emulation options available.
Allows the selection of the specific emulation to be selected from a list.
The allowable emulation options are: PGL for Printronics, ZGL for Zebra, TGL for TEC, IGL for
Intermec, SGPL for SATO, and DGL for Datamax.
DESCRIPTION
DESCRIPTION
4-72