Sensing; Media; Ribbon; Regulatory - SATO GL4xxe Series Operator's Manual

SENSING

Gap
Reflective Eye-Mark
Ribbon Near End
Media Out
Ribbon Out
Cover Open

MEDIA

Width
Length (Continous)
Length (Tear-Off)
Type
Thickness
Roll Diameter
Core Diameter
Wind Direction
Fan-Fold Height

RIBBON

Width
Length
Wound
Core Diameter
Roll Diameter

REGULATORY

Radiation Noise
Static Electricity
AC Line Noise
Packing Drop Standard
Environmental (RoHS)
GL408-412e Operator's Manual
Unit 2: Technical Data
Position & Sensitivity Adjustable
Position & Sensitivity Adjustable
Fixed (enabled/disabled)
Fixed (always enabled)
Fixed (always enabled)
Fixed (always enabled)
Media Width: 0.87 to 5.04 Inches (22 - 128mm)
Media Width with Backing Paper: 0.98 to 5.16 Inches (25 - 131mm)
Media Length: 0.24 to 15.63 Inches (6 - 397mm)
Media Length with Backing Paper: 0.35 to 15.75 Inches (9 - 400mm)
Media Length: 0.67 to 15.63 Inches (17 - 397mm)
Media Length with Backing Paper: 0.79 to 15.75 Inches (20 - 400mm)
Direct Thermal or Thermal Transfer
0.002 to 0.010 Inches ( 0.06 - 0.268 mm)
Maximum: 10.43 Inches (265mm)
1.5 to 4.0 Inches (38.1 - 101.6mm)
Face In, Face Out (linerless only)
Maximum: 7.87 Inches (200mm)
Maximum: 5.04 Inches (128mm)
Maximum: 3.35 Inches (85 mm)
FCC Part 15, Subpart B, Class B
IEC61000-4-2, Level 3
Chromium: below 0.1%
Cadmium: below 0.01%
Polybrominated Bipheny (PBB): below 0.1%
Polybrominated Diphenyl Ether (PBDE): below 0.1%
2-3
Roll or Fan-Fold
Eye-Mark or Gap
1476 Feet (450M)
Face In, Face Out
1.00 Inch (25.6 mm)
EN55022 Class B
Above: 1000Vp-p
ISTA-2A
Lead: below 0.1%
Mercury: below 0.1%