SATO GL4xxe Series Operator's Manual page 64

MENU
CONFIG MODE
Save Config.
Load Config.
Print Config.
Delete Config.
Power-Up Config.
Protect Config.
Name Config 1
Name Config 2
Name Config 3
Name Config 4
Name Config 5
Name Config 6
Name Config 7
Name Config 8
Reset Cfg Names
Auto Save
CONFIG MODE
Save Config.
Save Config.
1*
Saving
Configuration
CONFIG MODE
Load Config.
Load Config.
Factory*
Loading Factory
Configuration
GL408-412e Operator's Manual
Unit 4: Printer Configuration
CONFIGURATION MODE (TABLE 4-2)
Is the menu selection screen for the CONFIGURATION Mode.
This menu allows up to eight unique configurations to be saved to meet different printer
requirements. These saved configurations eliminate the need to change the parameter settings
as needed. The configurations are stored in memory and will not be lost when the printer is
powered off.
Note: If the Protect Configs feature is enbled, the new configuration will not be saved unless the
exisitng configuration has first been deleted.
The factory default is 1.
Is a sub-menu of the configuration save feature. This menu screen permits a particular print job to
be assigned a numeral reference. As many as eight printer configurations may be saved.
Is an informational menu screen displaying the configuration is being saved.
The printer can store up to eight configurations in memory. This menu set allows the selection
and loading of a specific configuration.
Is a sub-menu of the configuration load feature. This menu screen permits a particular
configuration to be assigned a numeral reference. As many as eight configurations may be
loaded.
The factory default is Factory.
Is an informational menu screen displaying the configuration is being loaded.
DESCRIPTION
4-27