Power Mode - SATO Argox AS-9400 User Manual

AS-9400
User Guide

Power Mode

Parameter # 0x80
This parameter determines the power mode of the
engine.
In Low Power mode, the scan engine enters into a
low power consumption Sleep power state whenever
possible (provided all WAKEUP commands were
released). See Power
In Continuous Power mode, the scan engine remains
in the Awake state after each decode attempt (see
Power Management).
The Sleep and Awake commands (see SLEEP and
WAKEUP) can be used to change the power state in
either the Low Power mode or the Continuous Power
mode.
Management.
Continuous Power
(0x00)
Low Power
(0x01)
4