SATO GL4xxe Series Operator's Manual page 65

MENU
CONFIG MODE
Print Config.
Print Config.
Current*
CONFIG MODE
Delete Config.
Delete Config.
1*
Deleting
Configuration
CONFIG MODE
Power-Up Config.
Power-Up Config.
Factory*
CONFIG MODE
Protect Config.
Protect Configs.
Disable*
Name Config 1
1
GL408-412e Operator's Manual
Unit 4: Printer Configuration
CONFIGURATION MODE (TABLE 4-2)
This menu set is used to print a list of various stored printer configurations. It is recommended
that a printed list of loaded/saved configurations be kept for quick reference.
Is a sub-menu of the configuration print feature.
The factory default is Current.
This menu set is used to delete specific configurations stored in the printer's memory.
Allows the selection of the configuration to be deleted. The factory default may not be deleted.
The factory default is 1.
Is an informational menu screen displaying the configuration is being deleted.
This menu set allows the selection of which stored configuration will be inilized when the printer is
powered on. Any one of the saved configurations or the factory default configuration may be
chosen.
The factory default is Factory.
Allows the selection of the configuration that will be initialized at startup.
This menu set determines if a new configuration will overwrite an exisitng configuration.
Allows the selection of the desired option.
• Disable - factory default. Will overwrite.
• Enable - will not overwrite.
There is a menu set for each of the saved configurations (1 through 8). By entering the specific
menu set designated for a particular configuration, that configuration may be provided with a text
name. The assigned text name may not exceed 15 characters.
When a configuration has been assigned a name here, all other menus (Save, Load, Print,
Delete, Power-Up, Protect) relative to that particular configuration will also display the assigned
file name.
DESCRIPTION
4-28