Menu Definition Tables; User Mode - SATO GL4xxe Series Operator's Manual

MENU DEFINITION TABLES

MENU
INTERFACES

USER MODE

Print Speed
Print Darkness
Pitch Offset
Ver Print Offset
Hor Print Offset
Label Length
Label Width
Slash Zero
Character Pitch
Protocol C. Code
Euro Character
Ver BaseRefPoint
Hor BaseRefPoint
UPC Descenders
Vert. DPI Adjust
C128 Mode Switch
Error Handling
Mem Select (CC1)
Orientation
Slew Speed Ctrl
Print Direction
Tear-Off Time
Label Missing
Clip Page
Fault Reprint
Display Ribbon
Ribbon Near End
Units
Set Label Length
TOF Detect Fault
TOF Adjust Mode
TOF Adjust
Print Speed
4 ips*
Print Darkness
5*
Pitch Offset
00.0 mm*
GL408-412e Operator's Manual
Unit 4: Printer Configuration
USER MODE (TABLE 4-1)
Permits entry into the USER Mode.
Is the menu selection screen for the USER Mode.
Specifies the speed in inches per second (ips) at which the media passes through the printer
while printing.
The speed may be adjusted in increments of 1 ips with a range from 1 to 10 ips.
The factory default is 4 ips.
Specifies the level of thermal energy provided from the print head to affect print darkness. The
print darkness setting needed is dependent on the type of ribbon and media installed for use and
also relative to print speed.
The adjustment range is from -15 to +15. The factory default is -3.
This setting vertically adjusts where the printer begins printing relative to top-of-form.
The allowable range is -12.7 to +5 millimeters.
DESCRIPTION
4-22