Print Head Pressure - SATO GL4xxe Series Operator's Manual

PRINT HEAD PRESSURE

Print Head Pressure allows for the print head to be adjusted to accommodate different media types (thicknesses).
The pressure setting lever is two posiiton (normal and high). The table that follows coorelates the media media
used with apressure setting.
To adjust the pressure lever, the balance dial must be set to the "A" position. Once the pressure is properly set,
return the balance dial to its previous position.
BALANCE ADJUSTMENT
MEDIA
Thin paper, normal label, etc.
Thick paper, tag stock, etc.
Pressure Lever
Balance Dial
Set Screw
GL408-412e Operator's Manual
Unit 6: Maintenance
SCALE
Normal
High
Figure 6-6, Print Head Pressure
6-8
THICKNESS
0.080 to 0.200
0.200 to 0.268
Upper Print Assy
Dial Window