Management; User Account Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
4.

Management

User Account Settings

User Account Settings
On this page, user accounts can be created and configured. Also on this page active user account
sessions can be viewed.
There are several configuration options available in the Web User Interface (Web UI). The set of
configuration options available to the user depends on the account's Privilege Level.
To view the following window, click Management > User Account Settings, as shown below:
After selecting the User Management Settings tab, the following page will appear.
The fields that can be configured are described below:
Parameter
User Name
Privilege
Password Type
Password
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified user account entry.
After selecting the Session Table tab, the following page will appear.
NOTE: By default, there is no user account created on this switch.
Figure 4-1 User Management Settings Window
Description
Enter the user account name here. This name can be up to 32
characters long.
Enter the privilege level for this account here. This value must be
between 1 and 15.
Select the password type for this user account here. Options to choose
from are None, Simple, and Cipher.
After selecting either Simple or Cipher as the password type, enter
the password for this user account here.
22