Layer 3 Features; Arp; Arp Aging Time; Static Arp - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
6.

Layer 3 Features

ARP

Gratuitous ARP
IPv4 Interface
IPv4 Static/Default Route
IPv4 Route Table
IPv6 Interface
IPv6 Static/Default Route
IPv6 Route Table
ARP

ARP Aging Time

On this page, users can view and configure the ARP aging time settings. To view the following window,
click L3 Features > ARP > ARP Aging Time, as shown below:
The fields that can be configured are described below:
Parameter
Timeout
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.

Static ARP

On this page, users can view and configure the static ARP settings. To view the following window, click
L3 Features > ARP > Static ARP, as shown below:
The fields that can be configured are described below:
Figure 6-1 ARP Aging Time Window
Description
After click the Edit button, enter the ARP aging timeout value here.
Figure 6-2 Static ARP Window
52