Dscp Cos Mapping - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
From Port ~ To Port
Trust State
DSCP Mutation Map
Click the Apply button to accept the changes made.

DSCP CoS Mapping

On this page, users can view and configure the DSCP CoS mapping settings. To view the following
window, click QoS > Advanced Settings > DSCP CoS Mapping, as shown below:
The fields that can be configured are described below:
Parameter
From Port ~ To Port
CoS
DSCP List
Click the Apply button to accept the changes made.
Figure 7-8 Port Trust State and Mutation Binding Window
Description
Select the range of ports that will be used for this configuration here.
Select the port trust state option here. Options to choose from are CoS
and DSCP.
Select and enter the DSCP mutation map name used here. This name
can be up to 32 characters long. Select the None option to not allocate
a DSCP mutation map to the port(s).
Figure 7-9 DSCP CoS Mapping Window
Description
Select the range of ports that will be used for this configuration here.
Select the CoS value to map to the DSCP list. Options to choose from
are 0 to 7.
Enter the DSCP list value to map to the CoS value here. This value
must be between 0 and 63.
69