D-Link DXS-3600 Series Reference Manual page 22

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured for Global State are described below:
Parameter
Source Interface State
Type
Interface ID
Click the Apply button to accept the changes made.
The fields that can be configured for Buffer Log Settings are described below:
Parameter
Buffer Log State
Severity
Discriminator Name
Write Delay
Figure 3-13 System Log Settings Window
Description
Select this option to enable or disable the source interface's global
state.
Select the type of interface that will be used. Options to choose from
are Loopback, Mgmt, and VLAN.
Enter the interface's ID used here.
When selecting the Loopback option as the Type, enter the
interface's ID used here. This value must be between 1 and 8.
When selecting the Mgmt option as the Type, enter the interface's ID
used here. This value can only be 0 as there is only one management
interface.
When selecting the VLAN option as the Type, enter the interface's ID
used here. This value must be between 1 and 4094.
Description
Select whether the enable or disable the buffer log's global state here.
Options to choose from are Enable, Disabled, and Default. When
selecting the Default option, the buffer log's global state will follow the
default behavior.
Select the severity value of the type of information that will be logged.
Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical),
3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7
(Debugging).
Enter the discriminator name used here. This name can be up to 15
characters long.
Enter the log's write delay value here. This value must be between 0
and 65535 seconds. By default, this value is 300 seconds. Tick the
17