Configuration Restore From Tftp; Configuration Backup To Http - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabit ethernet switch web ui reference guide
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Restore button to initiate the configuration restore.

Configuration Restore from TFTP

On this page, users can initiate a configuration restore from a TFTP server. To view the following window,
click Tools > Configuration Restore & Backup > Configuration Restore from TFTP, as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
VRF Name
Source URL
Destination URL
Click the Restore button to initiate the configuration restore.

Configuration Backup to HTTP

On this page, users can initiate a configuration file backup to a local PC using HTTP. To view the
following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP,
as shown below:
The fields that can be configured are described below:
Parameter
Source URL
option to restore and overwrite the start-up configuration file on the
switch.
Figure 11-7 Configuration Restore from TFTP Window
Description
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the configuration file located on
the TFTP server here. This field can be up to 64 characters long.
Enter the destination path and location where the configuration file
should be stored on the switch. This field can be up to 64 characters
long. Select the running-config option to restore and overwrite the
running configuration file on the switch. Select the startup-config
option to restore and overwrite the start-up configuration file on the
switch.
Figure 11-8 Configuration Backup to HTTP Window
Description
Enter the source filename and path of the configuration file located on
159

Advertisement

Table of Contents
loading

Table of Contents