Mac Address Table Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
From Port ~ To Port
VLAN ID
MAC Address
Click the Apply button to accept the changes made.
Click the Delete All button to remove all the entries.
Click the Delete button to remove the specific entry.

MAC Address Table Settings

On this page, users can view and configure the MAC address table's global settings. To view the
following window, click L2 Features > FDB > MAC Address Table Settings, as shown below:
The fields that can be configured are described below:
Parameter
Aging Time
Aging Destination Hit
Click the Apply button to accept the changes made.
After selecting the MAC Address Learning tab option, at the top of the page, the following page will be
available.
Figure 5-2 Multicast Static FDB Window
Description
Select the range of ports that will be used for this configuration here.
Enter the VLAN ID of the VLAN the corresponding MAC address
belongs to.
Enter the static destination MAC address of the multicast packets. This
must be a multicast MAC address. The format of the destination MAC
address is 01-XX-XX-XX-XX-XX.
Figure 5-3 MAC Address Table Settings (Global Settings) Window
Description
Enter the MAC address table's aging time value here. This value must
be between 10 and 1000000 seconds. Entering 0 will disable MAC
address aging. By default, this value is 300 seconds.
Select to enable or disable the aging destination hit function.
25