Vlan; 802.1Q Vlan - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
MAC Notification Trap State
From Port ~ To Port
Added Trap
Removed Trap
Click the Apply button to accept the changes made for each individual section.
After selecting the MAC Notification History tab, at the top of the page, the following page will be
available.
On this page, a list of MAC notification messages will be displayed.

VLAN

802.1Q VLAN

On this page, users can view and configure the VLAN settings on this switch. To view the following
window, click L2 Features > VLAN > 802.1Q VLAN, as shown below:
The fields that can be configured are described below:
Parameter
VLAN ID List
VLAN ID
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to locate all the entries.
value is 1.
Select to enable or disable the MAC notification trap state.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the added trap for the port(s) selected.
Select to enable or disable the removed trap for the port(s) selected.
Figure 5-7 MAC Notification (MAC Notification History) Window
Figure 5-8 802.1Q VLAN Window
Description
Enter the VLAN ID list that will be created here.
Enter the VLAN ID that will be displayed here.
28