Configuration Backup To Tftp; Log Backup; Log Backup To Http - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Backup button to initiate the configuration file backup.

Configuration Backup to TFTP

On this page, users can initiate a configuration file backup to a TFTP server. To view the following
window, click Tools > Configuration Restore & Backup > Configuration Backup to TFTP, as shown
below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
VRF Name
Source URL
Destination URL
Click the Backup button to initiate the configuration file backup.

Log Backup

Log Backup to HTTP

On this page, users can initiate a system log backup to a local PC using HTTP. To view the following
window, click Tools > Log Backup > Log Backup to HTTP, as shown below:
the switch here. This field can be up to 64 characters long. Select the
running-config option to backup the running configuration file from
the switch. Select the startup-config option to backup the start-up
configuration file from the switch.
Figure 11-9 Configuration Backup to TFTP Window
Description
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the configuration file located on
the switch here. This field can be up to 64 characters long. Select the
running-config option to backup the running configuration file from
the switch. Select the startup-config option to backup the start-up
configuration file from the switch.
Enter the destination path and location where the configuration file
should be stored on the TFTP server. This field can be up to 64
characters long.
Figure 11-10 Log Backup to HTTP Window
160