DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Start Sequence No.
Stop
Counter State
Remark
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
To view the list of rules, that are associated with an ACL profile, select the ACL profile (found in the ACL
profile table). The rule of ACL rules, connected to the selected ACL profile, will be displayed in the ACL
rule table, as shown below:
Click the Delete button to remove the specific ACL rule.
Extend IP ACL
After clicking the Add ACL button, users can create a new ACL profile, as shown below:
Figure 8-6 Standard IP ACL (Counter State Enabled) Window
Description
Enter the start sequence number here.
Enter the stop sequence number here.
Select to enable or disable the counter state option here.
Enter an optional remark that will be associated with this profile here.
Figure 8-7 Standard IP ACL (Rule Display) Window
81