Firmware Backup To Tftp; Configuration Restore & Backup; Configuration Restore From Http - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Firmware Backup to TFTP

On this page, users can initiate a firmware backup to a TFTP server. To view the following window, click
Tools > Firmware Upgrade & Backup > Firmware Backup to TFTP, as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
VRF Name
Source URL
Click the Backup button to initiate the firmware backup.
Configuration Restore & Backup

Configuration Restore from HTTP

On this page, users can initiate a configuration restore from a local PC using HTTP. To view the following
window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as
shown below:
The fields that can be configured are described below:
Parameter
Source URL
Destination URL
Figure 11-5 Firmware Backup to TFTP Window
Description
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the firmware file located on the
switch here. This field can be up to 64 characters long.
Figure 11-6 Configuration Restore from HTTP Window
Description
Enter the source filename and path of the configuration file located on
the local PC. This field can be up to 64 characters long. Alternatively
click the Browse button to navigate to the location of the configuration
file located on the local PC.
Enter the destination path and location where the configuration file
should be stored on the switch. This field can be up to 64 characters
long. Select the running-config option to restore and overwrite the
running configuration file on the switch. Select the startup-config
158