Firmware Upgrade From Tftp; Firmware Backup To Http - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Upgrade button to initiate the firmware upgrade.

Firmware Upgrade from TFTP

On this page, users can initiate a firmware upgrade from a TFTP server. To view the following window,
click Tools > Firmware Upgrade & Backup > firmware Upgrade from TFTP, as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
VRF Name
Source URL
Destination URL
Click the Upgrade button to initiate the firmware upgrade.

Firmware Backup to HTTP

On this page, users can initiate a firmware backup to a local PC using HTTP. To view the following
window, click Tools > Firmware Upgrade & Backup > Firmware Backup to HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Source URL
Click the Backup button to initiate the firmware backup.
Figure 11-3 Firmware Upgrade from TFTP Window
Description
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the firmware file located on the
TFTP server here. This field can be up to 64 characters long.
Enter the destination path and location where the new firmware should
be stored on the switch. This field can be up to 64 characters long.
Figure 11-4 Firmware Backup to HTTP Window
Description
Enter the source filename and path of the firmware file located on the
switch here. This field can be up to 64 characters long.
157